![]() ![]() Slide all the contents together into the opening in the frame. Then remove the coating on the top side, and wipe. Lay this side down on top of your mat, artwork and foam core backing. Peel off the coating on one side, and remove any dust particles with a soft cloth. This coating will be either plastic or paper, and is left in place when shipping your frame to minimize the risk of scratching. If you order acrylic glass for your frame, you will need to remove the coating from the glass before you insert it into the frame. You should now have three sides of the frame constructed, creating a U shape, and one long frame rail remaining. Repeat steps 3 and 4 on the other end of the long rail, using the other short frame rail. Tighten each bracket screw until the two frame rails are snug.ĥ. The diagonal frame ends should be flush, making a neat corner. Holding the corners in place, slide one of the short frame rails onto the end that is jutting out.Ĥ. Insert one end of the set of corners into the track on the back side of the long frame rail. Stack a tapped corner on top of a blank corner. ![]() Before you begin to assemble your frame, make sure all the screws (those in the tapped corners and possibly the hanging clips) are loosened/raised as much as possible, so the backs of the hardware are flat. (To order extra hardware, see the links at the bottom of the page.)ġ. Gloves (optional the edges of the metal frame can be sharp).Wire cutters - optional to cut the excess wire.Philips (star) and Flat head screwdriver.Larger frames come with two, smaller frames with one. (Smaller frames can be held by one hanger, hung from a nail in the wall). You should have a length of wire approximately the length of the longest side plus 6 inches. Four (4) L-shaped back plates (without screws)įor larger frames, two clips or mounts are suppliedįor smaller frames, one clip or mount is supplied.Four (4) L-shaped tapped corners (with screws).In addition to two short and two long frame rails with tracked on the back sides, you should receive a Hardware Assembly Kit including: If you still have difficulty after reading this guide, please don't hesitate to contact us - we're always happy to help. Whether your purchase is intended for a painting, a drawing, or a mixed media piece, you're sure to be pleased with your new, high quality frame.īelow are instructions for assembling your frame (if it came unassembled) and inserting your artwork (if it arrived assembled). Thank you for ordering from KeenART Media! Your new metal frame will enhance your artwork, allow you to display it with ease, and protect it for years to come. HOW TO ASSEMBLE A METAL (ALUMINUM) PICTURE FRAME: Contact KeenART Turnaround time Shipping Rush Orders Products & Pricing -> ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |